Atlas 412, Closed Front, Commercial 4 Post Auto Lift, 12000-lb Capacity
$69.90
-
Returns & Exchanges within 30 daysAny return for unsatisfied item(s) is available in 30 days -
Worry-Free ReturnsSeller covers return shipping
-
Money Back GuaranteeA full refund within one week upon receiving your return
-
3-Month WarrantyCovering any possible defect in materials and workmanship
The Atlas 412 12,000-pound capacity four post lifts are designed and built to commercial grade standards and will provide many years of service. Our Atlas lifts offer many exclusive features not found on many other competitor’s lifts.
The Atlas 412 is tested to ensure that this lift system will perform flawlessly at its rated capacities. The Atlas 412 has been manufactured to the same exacting specifications for many years.
The Atlas 412 uses a high strength cable system (with a under runway oversized hydraulic cylinder) powered by a 220-volt (single phase) power unit to raise and lower the lift. Many competitors use an “old style” chain lifting system with an exposed hydraulic cylinder system. Old style chain lifts are difficult to “level” properly and the exposed hydraulic cylinder is responsible for numerous “door dings”.
Finance Your Auto Lift Today. Apply Now.
Free Shipping
Featuresinclude
- Commercial Grade
- Powder Coat Finish
- Pneumatic Single-Point Lock Release
- Mounting Hardware
- 5-Year Structural, 2-Year Power Unit/Cylinder Warranty
- (rolling jacks not included)
Specifications include
| Atlas 412 Specifications | |
| Capacity | 12,000 lb. |
| Lifting Height | 75 1/2″ (6′ 3 1/2″) |
| Overall Width Of Columns (Without Motor) | 126″ (10′ 6″) |
| Overall Width Of Columns (With Motor) | 135″ (11′ 3″) |
| Overall Length With Approach Ramp | 230″ (19′ 2″) |
| Overall Length Without Approach Ramp | 200″ (16′ 8″) |
| Length Between Columns | 184 1/4″ (15′ 4 1/4″) |
| Runway Length | 186 1/2″ (15′ 6 1/2″) |
| Runway Width | 22″ (1′ 10″) |
| Thickness Of Runway | 7″ |
| Width Between Runways | 44 1/2″ (3′ 8 1/2″) |
| Width Between Runway Rails | 42″ (3′ 6″) |
| Outside Runway To Outside Runway | 84 3/4″ (7′ 3/4″) |
| Clearance Under Runways | 68 1/4″ (5′ 8 1/4″) |
| Clearance Between Columns | 112 1/4″ (9′ 4 1/4″) |
| Height Of Columns | 82″ (6′ 10″) |
| Maximum Wheel Base | 185″ (15′ 5″) |
| Drive Thru | 98 1/2″ (8′ 2 1/2″) |
| Motor/Electrical Requirement | 220 Volt, Single Phase;A 30 amp Breaker Is Recommended. (Power Unit Position may vary from lift to lift) |
| Shipping Weight | 412 2,400 lb. 412A 2,700 lb. |
Related products
